Note on installation of Software:  EU version
	1.Installation on win7 Computers - Program runs as a 32 bit program on a 64 bit computer.

	If this is an upgrade form a previous ESCA Hawk version on a Win 7 computer:

		Uninstall the old version of your ESCA software.
		Do not uninstall Motion Planner
		You will need to upgrade the USB Driver after the new software is installed
		If you fave Windows ACCESSRT installed leave it alown. 
		This version does not need Windows ACCESSRT so don't install it. 

	First installation of ESCA Hawk 7 software on Win 7 computer: 
		Note:  It is not necessary to install Windows ACCESSRT

		A.Full Installation - Capture and Analysis - Use ESCA Hawk 7 EU V7.03.04 folder.

			Start installation with the ESCA interface USB cable unpuged from the computer.

			A.1 Install 6K4 Motion Planner - This provides the drivers for the 6K4

			A.2 Run the setup file in the ESCA Hawk EU folder as follows:

				A.2.1 IMPORTANT!!!!!!!!

					Right click on the Setup file and select Properties.
					Select the compatibility Tab
					Check the "Run this program in compatibility mode for:" box
					Select Windows XP SP 3
					Close Properties dialog
					Run the setup file 

			A.3 Replay to any messages that ask if you want to keep files on your hard drive that 					are newer than the install package - YES.

			A.4 When the installation is complete follow the instructions in A.2.1 for each 					installed program.

				A.4.1 The compatibility must be set for each installed program BEFOR it 						is used.  THE REGISTRATION WILL NOT WORK FOR THE cAPTURE OR ANALYSIS PROGRAMS IF 					THIS IS NOT SET CORRECTLY! This setting only needs to be done once.

				A.4.2 The programs that need the compatability set are found in the C:\Program 						Files(x86)\ESCA Hawk7 folder.

				A4.1.3 The files are:

					DOS Import win 7.exe
					DP Viewer.exe
					ESCA Hawk 7.exe
					Hawk Analysis7.exe
					SixKWiz.exe
					StartHawkA7.exe
					StartHawk7EU.exe
					RSJoystick.exe

	               	A.5 Run the StartHawk7EU.exe in the ESCA Hawk7 folder or from the Windows start Menu.  					Then follow the registration process.
			A.6 Plug the ESCA interface USB cable in.  Be sure the Program CD is in the drive. If 					necessary browser to the "Signedx64DriverPack" folder when the driver installation 					wizard ask for the location of the driver.  This folder is in the same folder as the 					ESCA Hawk EU folder on the CD.  The USB driver should install automatically.

			This installation is now complete.


		B. Stand alown Analysis Program - Use "Hawk Analysis Win 7 s" folder.
	
			A.2 Run the setup file in the "Hawk Analysis Win 7 s" folder as follows:
				A.2.1 IMPORTANT!!!!!!!!

					Right click on the Setup file and select Properties.
					Select the compatibility Tab
					Check the "Run this program in compatibility mode for:" box
					Select Windows XP SP 3
					Close Properties dialog
					Run the setup file 

			A.3 Replay to any messages that ask if you want to keep files on your hard drive that 					are newer than the install package - YES.

			A.4 When the installation is complete follow the instructions in A.2.1 for each 					installed program.

				A.4.1 The compatibility must be set for each installed program BEFOR it 						is used.  THE REGISTRATION WILL NOT WORK FOR THE cAPTURE OR ANALYSIS PROGRAMS IF 					THIS IS NOT SET CORRECTLY! This setting only needs to be done once.

				A.4.2 The programs that need the compatability set are found in the C:\Program 						Files(x86)\ESCA Hawk7 folder.

				A4.1.3 The files are:

					DOS Import win 7.exe
					DP Viewer.exe
					Hawk Analysis7.exe
					StartHawkA7.exe
					
	               	A.5 Run the StartHawkA7.exe in the ESCA Hawk7 folder or from the Windows start Menu.  					Then follow the registration process.

			This installation is now complete.

	2.Installation on win XP Computers 

	If this is an upgrade form a previous ESCA Hawk version on a XP computer:

		Uninstall the old version of your ESCA software.
		Do not uninstall Motion Planner
		You will need to upgrade the USB Driver after the new software is installed
		If you fave Windows ACCESSRT installed leave it alown. 
		This version does not need Windows ACCESSRT so don't install it. 

		A.Full Installation - Capture and Analysis - Use ESCA Hawk 7 EU V7.03.04 folder.
			Note: you do not need to install Windows ACCESSRT for this version of ESCA software.

			Start installation with the ESCA interface USB cable unpuged from the computer.

			A.1 Install 6K4 Motion Planner - This provides the drivers for the 6K4

			A.2 Install the CH Products drivers in the "XP Joystick and Ethernet setup folder".

			A.3 Run the setup file in the ESCA Hawk EU folder.

			A.4 Replay to any messages that ask if you want to keep files on your hard drive that 					are newer than the install package - YES.

	               	A.5 Run the StartHawk7EU.exe in the ESCA Hawk7 folder or from the Windows start Menu.  					Then follow the registration process.

			A.6 Plug the ESCA interface USB cable in.  Be sure the Program CD is in the drive. If 					necessary browser to the "xp 200 USB Driver" folder when the driver installation 					wizard ask for the location of the driver.  This folder is in the same folder as the 					ESCA Hawk EU folder on the CD.  The USB driver should install automatically.

			A.7 Copy the "TestJoystick.exe" and the "SixKWiz.exe" into the ESCA Hawk7 folder to 					replace the RSJoystick and the SixKWiz program.  (C:\Program Files\ESCA Hawk7 folder)
			
			This installation is now complete.

	3.